Renesas F-ZTAT H8 Series Hardware Manual page 44

Section 1 Overview
Type Symbol
Programmable TP
15
timing pattern
controller (TPC)
Serial TxD
communication
interface (SCI)
RxD
SCK
A/D converter AN
7
ADTRG
D/A converter DA , DA
1
A/D and D/A AV
CC
converters
AV
SS
V
REF
I/O ports P1
7
P2
7
P3
7
P4
7
Rev. 3.00 Mar 21, 2006 page 16 of 814
REJ09B0302-0300
Pin No.
to TP 9 to 2,
0
100 to 93
, TxD 13, 12
1 0
, RxD 15, 14
1 0
, SCK 17, 16
1 0
to AN 85 to 78
0
9
85, 84
0
76
86
77
to P1 43 to 36
0
to P2 52 to 45
0
to P3 34 to 27
0
to P4 26 to 23,
0
21 to 18
I/O Name and Function
Output TPC output 15 to 0: Pulse output
Output Transmit data (channels 0 and 1):
SCI data output
Input Receive data (channels 0 and 1):
SCI data input
Input/ Serial clock (channels 0 and 1):
output SCI clock input/output
Input Analog 7 to 0: Analog input pins
Input A/D trigger: External trigger input for
starting A/D conversion
Output Analog output: Analog output from the D/A
converter
Input Power supply pin for the A/D and D/A
converters. Connect to the system power
supply (+5 V) when not using the A/D and
D/A converters.
Input Ground pin for the A/D and D/A converters.
Connect to system ground (0 V).
Input Reference voltage input pin for the A/D and
D/A converters. Connect to the system
power supply (+5 V) when not using the A/D
and D/A converters.
Input/ Port 1: Eight input/output pins.
output The direction of each pin can be selected in
the port 1 data direction register (P1DDR).
Input/ Port 2: Eight input/output pins.
output The direction of each pin can be selected in
the port 2 data direction register (P2DDR).
Input/ Port 3: Eight input/output pins.
output The direction of each pin can be selected in
the port 3 data direction register (P3DDR).
Input/ Port 4: Eight input/output pins.
output The direction of each pin can be selected in
the port 4 data direction register (P4DDR).