Administrator-Address - H3C s3100 series Command Manual

If you do not specify the member number when adding a new cluster member, the management device
assigns the next available member number to the new member. If you want to specify the member
manually, you need to specify a number that is never used by a member device of the cluster.
After you add a candidate device to the cluster, the super password of the device automatically changes
to the super password of the management device. If the management device changes its super
password, the member devices will automatically synchronize their super passwords to the new super
password of the management device.
Examples
# Add a candidate device, whose MAC address and user password are 000f-e20f-35e7 and 123456
respectively, to the cluster, and set the member number to 6.
<aaa_0.Sysname> system-view
System View: return to User View with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] add-member 6 mac-address 000f-e20f-35e7 password 123456

administrator-address

Syntax
administrator-address mac-address name name
undo administrator-address
View
Cluster view
Parameters
mac-address: MAC address of the management device to be specified.
name: Name of an existing cluster, a string of up to 8 characters. Note that the name of a cluster can
only contain alphanumeric characters, minus signs (-), and underscores (_).
Description
Use the administrator-address command to specify the management device MAC address and the
cluster name on a device to add the device to the cluster.
Use the undo administrator-address command to remove the management device MAC address
from the MAC address list of a member device, that is, remove the member device from the cluster.
Normally, this command is used for debugging and restoring purpose.
By default, a switch is not a member of any cluster.
A cluster has one and only one management device. Setting the management device MAC address on
a device can add the device to the cluster and enable the device to identify the management device
even if it restarts.
You can add a device to a cluster using the administrator-address command no matter whether the
super password of the device is consistent with that of the management device.
Normally it is recommended to use the delete-member command on the management device to
remove a member device from the cluster.
2-14