Display Stp Root - H3C s3600 series Command Manual

Description
Use the display stp region-configuration command to display the activated MST region configuration,
including the region name, region revision level, and VLAN-to-STI mappings configured for the switch.
Related commands: stp region-configuration.
Examples
# Display the configuration of the MST region.
<Sysname> display stp region-configuration
Oper Configuration
Format selector :0
Region name
Revision level
Instance Vlans Mapped
0 21 to 4094
1 1 to 10
2 11 to 20
Table 1-6 Description on the fields of the display stp region-configuration command
Format selector
Region name
Revision level
Instance Vlans Mapped

display stp root

Syntax
display stp root
View
Any view
Parameters
None
Description
Use the display stp root command to display information about the root ports in the MSTP region
where the switch resides.
Examples
# Display information about the root ports in the MSTP region where the switch resides.
<Sysname> display stp root
MSTID Root Bridge ID
:hello
:0
Field
ExtPathCost
Description
The selector specified by MSTP
The name of the MST region
The revision level of the MST region
VLAN-to-STI mappings in the MST region
IntPathCost Root Port
1-9