D-Link DXS-3600 Series Cli Reference Manual page 274

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
The command is used to define a maintenance domain and enter the maintenance domain configuration
mode. Each maintenance domain has unique name amongst all those used or available to a service
provider or operator. It facilitates easy identification of administrative responsibility for each maintenance
domain. A unique maintenance level (from 0 to 7) is assigned to define the hierarchical relationship
between domains. The larger range of domain has the higher value of level.
If the input is error or the maintenance domain name already exists, it will not create maintenance domain.
When the maintenance domain is deleted, the configuration based on it is also deleted.
Example
This example shows how to define the maintenance domain called "op-domain" with maintenance domain
level of 2.
Switch# configure terminal
Switch(config)# cfm domain op-domain level 2
Switch(config-cfm-md)#
15-6 cfm global enable
This command is used to enable the CFM function globally. To disable the CFM function globally, use the
no command.
cfm global enable
no cfm global enable
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to enable or disable the CFM globally.
Example
This example shows how to enable CFM globally.
Switch# configure terminal
Switch(config)# cfm global enable
Switch(config)#
15-7 cfm enable
This command is used to enable the CFM function on the specified physical interface. To disable the
CFM function on the specified physical interface, use the no command.
269