D-Link DXS-3600 Series Cli Reference Manual page 296

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Fault Alarm
15-32 show cfm mep fault
This command is used to display the MEPs that have faults.
show cfm mep fault
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This display provides an overview of the fault status by the MEPs. This command displays all the fault
conditions that were detected by the MEPs contained in the specified MA.
Example
This example shows how to display the MEPs that have faults.
Switch# show cfm mep fault
Domain Name: md5
MA Name: ma5
MEPID: 2
Some Remote MEP Down: This MEP is not receiving CCMs from
some other MEP in its configured list.
Error CCM Received: This MEP is receiving invalid CCMs, which may
be caused by configuration error.
Cross-connect CCM Received: This MEP is receiving CCMs that
could be from some other MA.
All: All types of fault alarms will be sent.
Some Remote MEP Defect Indication: The last CCM received by this
MEP from some remote MEP indicates that remote MEP detects some
defect.
Some Remote MEP MAC Status Error: The last CCM received by
this MEP indicated that the remote MEP's associated MAC is reporting
an error status.
Some Remote MEP Down: This MEP is not receiving CCMs from
some other MEP in its configured list.
Error CCM Received: This MEP is receiving invalid CCMs, which may
be caused by configuration error.
Cross-connect CCM Received: This MEP is receiving CCMs that
could be from some other MA.
Disabled: The fault alarm function is disabled.
291