D-Link DXS-3600 Series Cli Reference Manual page 307

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
16-4 show soft-acl
This command is used to display the information of software ACL filter maps.
show soft-acl filter-map [NAME]
Parameters
NAME
Default
None.
Command Mode
Any Configured Mode.
Command Default Level
Level: 1.
Usage Guideline
Use the command to display the specified software ACL filter map. If no name is specified, all software
ACL filter maps will be displayed.
Example
This example shows how to display the software ACL filter map.
Switch# show soft-acl filter-map
Software ACL Filter Map
cpu_filter:
Match Access-list(s):
IP(2): Ext-ip
MAC(3):mac4001
Match Ingress Interface(s):
eth1/0/1
Switch#
Display Parameters
IP(N)
(Optional) Specifies the name of the software ACL filter map to be
displayed.
The access list type. The number in parenthesis means the sequence
number of the associated access list.
302