D-Link DXS-3600 Series Cli Reference Manual page 316

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display the information about the debug status and message output of the modules.
Example
This example shows how to display the debug message output information of the modules.
Switch# debug show output
Debug Global State
Module name
-----------------
DHCPv6_CLIENT
DHCPv6_RELAY
OSPFV2
BGP
VRRP
RIPNG
Switch#
18-9 debug show error-log
This command is used to display error log information.
debug show error-log
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display the content of the error log.
Example
This example shows how to display error log information.
: Disabled
Output Enabled
-------- -------------------------------------
buffer No
buffer No
buffer No
buffer No
buffer No
buffer No
311