D-Link DXS-3600 Series Cli Reference Manual page 244

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
COMMUNITY-LIST-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display a specific community list or all configured community lists.
Example
This example shows how to display all of the configured IP community lists.
Switch# show ip community-list
Standard community list C1
permit internet
Standard community list C2
permit internet
Total Entries: 2
Switch#
11-96 show ip extcommunity-list
This command is used to display the configured extended community lists.
show ip extcommunity-list [EXTCOMMUNITY-LIST-NAME]
Parameters
EXTCOMMUNITY-LIST-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
(Optional) Specifies the community list name. The community list
name can be standard or expanded.
(Optional) Specifies the extended community list name. The
community list name can be standard or expanded.
239