D-Link DXS-3600 Series Cli Reference Manual page 341

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the effective setting of the trust relay information option function.
Example
This example shows how to use this command. Note that the display output lists the interfaces that are
configured to be trusted sources.
Switch# show ip dhcp relay information trusted-sources
List of trusted sources of relay agent information option:
vlan100
vlan500
Switch#
This example shows how to display when all interfaces are trusted sources. Note that the display output
does not list the individual interfaces.
Switch# show ip dhcp relay information trusted-sources
All interfaces are trusted source of relay agent information option
Switch#
21-17 show ip dhcp relay information option format-type
This command is used to display the interface option format configuration.
show ip dhcp relay information option format-type [interface INTERFACE-ID [,|-]]
Parameters
interface INTERFACE-ID
,
-
vlan200 vlan300
(Optional) Specifies to display information related to the interface
specified here. Enter the interface's ID after the keyword here. If no
interface ID is specified, then information related to all interfaces will
be displayed.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces are allowed before and
after the comma.
(Optional)Specifies a range of interfaces. No spaces are allowed
336
vlan400