D-Link DXS-3600 Series Cli Reference Manual page 258

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
11-111 debug ip bgp show interface
This command is used to display internal detailed information about the BGP interface.
debug ip bgp show interface
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to check the internal status and detailed information of the BGP interface.
Example
This example shows how to display internal detailed information about the BGP interface.
Switch# debug ip bgp show interface
Interface Information:
Name
------
System
if3
if10
if11
if2
loopback1 0267
Switch#
11-112 debug ip bgp show timer
This command is used to display internal detailed information about the BGP timer.
debug ip bgp show timer
Parameters
None.
Default
index network
----- ---------
0001 10.1.1.2/24
0002 30.1.1.5/8
0003 100.1.1.1/8
0004 10.1.1.1/8
0005 44.1.1.21/8
11.11.11.11/32
Flags Status VRF
----- ------ ------------
5 Up None
5 Up None
5 Up VPNA
5 Up VPNB
5 Down None
d Up None
253