Show Route Output - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show route output

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
3088
Syntax on page 3088
Syntax (EX Series Switches) on page 3088
show route output (address ip-address | interface interface-name)
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route output (address ip-address | interface interface-name)
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the entries in the routing table learned through static routes and interior gateway
protocols that are to be sent out the interface with either the specified IP address or
specified name.
To view routes advertised to a neighbor or received from a neighbor for the BGP protocol,
use the show route advertising-protocol bgp
commands instead.
address ip-address—Display entries in the routing table that are to be sent out the
interface with the specified IP address.
brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to
interface interface-name—Display entries in the routing table that are to be sent out the
interface with the specified name.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route output address on page 3089
show route output address detail on page 3089
show route output address extensive on page 3090
show route output address terse on page 3090
show route output interface on page 3090
show route output interface detail on page 3091
show route output interface extensive on page 3091
show route output interface terse on page 3091
and show route receive-protocol bgp
.
brief
Copyright © 2017, Juniper Networks, Inc.