Juniper ACX1000 Configuration Manual page 3184

ACX Series Universal Access Router Configuration Guide
Table 229: Communities Output Field Values (continued)
Value
options
origin
ospf-route-type
route-type-vendor
rte-type
target
unknown IANA
unknown OSPF vendor
community
Sample Output
show route table bgp.l2.vpn
show route table bgp.l3vpn.0
3126
Description
1 byte. Currently this is only used if the route type is
the field indicates that the route carries a type 2 metric.
(Used with VPNs) Identifies where the route came from.
1 byte, encoded as or
1 2
type 1 or a type 2 LSA);
3
for NSSA routes; or
7 129
Displays the area number, OSPF route type, and option of the route. This is configured using
the BGP extended community attribute
area-number:ospf-route-type:options
Displays the area number, OSPF route type, and option of the route. This is configured using
the BGP extended community attribute
area-number:ospf-route-type:options
Defines which VPN the route participates in;
. For example, 10.19.0.0:100.
number
Incoming IANA codes with a value between
community attribute is accepted, but it is not recognized.
Incoming IANA codes with a value above
attribute is accepted, but it is not recognized.
user@host> show route table bgp.l2.vpn
bgp.l2vpn.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.168.24.1:1:4:1/96
*[BGP/170] 01:08:58, localpref 100, from 192.168.24.1
AS path: I
> to 10.0.16.2 via fe-0/0/1.0, label-switched-path am
user@host> show route table bgp.l3vpn.0
bgp.l3vpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.71.15:100:10.255.71.17/32
10.255.71.15
10.255.71.15:200:10.255.71.18/32
or
5
for intra-area routes (depending on whether the route came from a
for summary routes; for external routes (area number must be
5
for sham link endpoint addresses.
. The format is
0x8000
.
. The format is
0x0306
.
has the format
target
and
0x1 0x7fff
. This code of the BGP extended community
0x8000
*[BGP/170] 00:03:59, MED 1, localpref 100, from
AS path: I
> via so-2/1/0.0, Push 100020, Push 100011(top)
. Setting the least significant bit in
7
32-bit IP address:16-bit
. This code of the BGP extended
Copyright © 2017, Juniper Networks, Inc.
);
0