Show System Autoinstallation Status - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show system autoinstallation status

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
3178
show system autoinstallation status
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command supported in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
(ACX Series routers, and EX Series switches only) Display autoinstallation status
information.
This command has no options.
view
ACX Series Autoinstallation Overview on page 75
Before You Begin Autoinstallation on an ACX Series Universal Access Router on page 77
Autoinstallation Configuration of ACX Series Universal Access Routers on page 78
USB Autoinstallation on ACX Series Routers on page 80
Verifying Autoinstallation on ACX Series Universal Access Routers on page 79
Verifying Autoinstallation on ACX Series Universal Access Routers on page 79
autoinstallation on page 1442
show system autoinstallation status on page 3179
Table 233 on page 3179 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
status
show system autoinstallation
Copyright © 2017, Juniper Networks, Inc.