Juniper ACX1000 Configuration Manual page 2872

ACX Series Universal Access Router Configuration Guide
Table 184: show ospf database Output Fields (continued)
Field Name Field Description
Type of link advertisement:
Type
or
Summary
LSA identifier included in the advertisement. An asterisk preceding the identifier
ID
marks database entries that originated from the local routing device.
Adv Rtr Address of the routing device that sent the advertisement.
Seq Link sequence number of the advertisement.
Age Time elapsed since the LSA was originated, in seconds.
Opt Optional OSPF capabilities associated with the LSA.
Cksum Checksum value of the LSA.
Len Length of the advertisement, in bytes.
Router Router link-state advertisement information:
bits
link count
—ID of a routing device or subnet on the link.
id
data
routing device that generated the LSP.
type
TOS count
TOS 0 metric
TOS
metric
Network Network link-state advertisement information:
mask
attached router
Summary link-state advertisement information:
Summary
mask
TOS
metric
How long until the LSA is regenerated.
Gen timer
How long until the LSA expires.
Aging timer
How long ago the route was installed.
Installed hh:mm:ss
ago
2814
ASBRSum
.
—Flags describing the routing device that generated the LSP.
—Number of links in the advertisement.
—For stub networks, the subnet mask. Otherwise, the IP address of the
—Type of link. It can be
PointToPoint
—Number of type-of-service (ToS) entries in the advertisement.
—Metric for ToS 0.
—Type-of-service (ToS) value.
—Metric for the ToS.
—Network mask.
—ID of the attached neighbor.
—Network mask.
—Type-of-service (ToS) value.
—Metric for the ToS.
, , , ,
Extern Network NSSA OpaqArea
, , , or .
Transit Stub Virtual
Level of Output
, , All levels
Router
All levels
All levels
All levels
All levels
All levels
All levels
All levels
detail extensive
detail extensive
detail extensive
extensive
extensive
extensive
Copyright © 2017, Juniper Networks, Inc.