Juniper ACX1000 Configuration Manual page 2904

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 189: show (ospf | ospf3) neighbor Output Fields
Field Name Field Description
Address Address of the neighbor.
Interface Interface through which the neighbor is reachable.
2846
interface interface-name—(Optional) Display information about OSPF neighbors for
the specified logical interface.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
neighbor—(Optional) Display information about the specified OSPF neighbor.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(OSPFv3 only) (Optional)
Display information about the OSPF neighbors for the specified OSPFv3 realm, or
address family. Use the
than IPv6 unicast, which is the default.
view
clear (ospf | ospf3) neighbor
show ospf neighbor brief on page 2848
show ospf neighbor detail on page 2848
show ospf neighbor extensive on page 2849
show ospf3 neighbor detail on page 2850
show ospf neighbor area area-id on page 2850
show ospf neighbor interface interface-name on page 2850
show ospf3 neighbor instance all (OSPFv3 Multiple Family Address Support
Enabled) on page 2850
Table 189 on page 2846 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
option to specify an address family for OSPFv3 other
realm
show (ospf | ospf3) neighbor
command.
Level of Output
All levels
All levels
Copyright © 2017, Juniper Networks, Inc.