Juniper ACX1000 Configuration Manual page 3064

ACX Series Universal Access Router Configuration Guide
Table 216: show route detail Output Fields (continued)
Field Name Field Description
First label in a block of labels and label block size. A remote PE routing device uses this first label
Label-Base, range
when sending traffic toward the advertising PE routing device.
status vector Layer 2 VPN and VPLS network layer reachability information (NLRI).
Accepted Multipath Current active path when BGP multipath is configured.
Accepted The LongLivedStale flag indicates that the route was marked LLGR-stale by this router, as part of the
operation of LLGR receiver mode. Either this flag or the LongLivedStaleImport flag may be displayed
LongLivedStale
for a route. Neither of these flags are displayed at the same time as the Stale (ordinary GR stale) flag.
The LongLivedStaleImport flag indicates that the route was marked LLGR-stale when it was received
Accepted
from a peer, or by import policy. Either this flag or the LongLivedStale flag may be displayed for a
LongLivedStaleImport
route. Neither of these flags are displayed at the same time as the Stale (ordinary GR stale) flag.
Accept all received BGP long-lived graceful restart (LLGR) and LLGR stale routes learned from
configured neighbors and import into the inet.0 routing table
Accept all received BGP long-lived graceful restart (LLGR) and LLGR stale routes learned from
ImportAccepted
configured neighbors and imported into the inet.0 routing table
LongLivedStaleImport
The LongLivedStaleImport flag indicates that the route was marked LLGR-stale when it was received
from a peer, or by import policy.
Path currently contributing to BGP multipath.
Accepted
MultipathContrib
Local preference value included in the route.
Localpref
BGP router ID as advertised by the neighbor in the open message.
Router ID
In a routing table group, the name of the primary routing table in which the route resides.
Primary Routing Table
In a routing table group, the name of one or more secondary tables in which the route resides.
Secondary Tables
3006
Table 217 on page 3006 describes all possible values for the Next-hop Types output field.
Table 217: Next-hop Types Output Field Values
Next-Hop Type
Broadcast (bcast)
Deny
Discard
Description
Broadcast next hop.
Deny next hop.
Discard next hop.
Copyright © 2017, Juniper Networks, Inc.