Juniper ACX1000 Configuration Manual page 3015

show route extensive ( ECMP)
show route extensive (Multipath Resolution)
Copyright © 2017, Juniper Networks, Inc.
PMSI: Flags 0x0: Label[0:0:0]: PIM-SM: Sender 10.0.0.40 Group
203.0.113.1
Next hop type: Indirect
Address: 0x92455b8
Next-hop reference count: 2
Source: 10.0.0.30
Protocol next hop: 10.0.0.40
Indirect next hop: 2 no-forward
State: <Active Int Ext>
Local AS: 64510 Peer AS: 64511
Age: 3 Metric2: 1
Validation State: unverified
Task: BGP_64510.10.0.0.30+179
Announcement bits (2): 0-PIM.v1 1-mvpn global task
AS path: I (Originator) Cluster list:
AS path: Originator ID: 10.0.0.40
Communities: target:64502:100 encapsulation:0L:14
Accepted
Localpref: 100
Router ID: 10.0.0.30
Primary Routing Table bgp.mvpn.0
Indirect next hops: 1
Protocol next hop: 10.0.0.40 Metric: 1
Indirect next hop: 2 no-forward
Indirect path forwarding next hops: 1
Next hop type: Router
Next hop: 10.0.24.4 via lt-0/3/0.24 weight 0x1
10.0.0.40/32 Originating RIB: inet.3
Metric: 1
Forwarding nexthops: 1
user@host> show route extensive
*IS-IS Preference: 15
Level: 1
Next hop type: Router, Next hop index: 1048577
Address: 0xXXXXXXXXXX
Next-hop reference count: YY
Next hop: 172.16.50.2 via ae1.0 balance 43%, selected
Session Id: 0x141
Next hop: 192.0.2.2 via ae0.0 balance 57%
user@host> show route extensive
inet.0: 37 destinations, 37 routes (36 active, 0 holddown, 1 hidden)
10.1.1.2/32 (1 entry, 1 announced)
TSI:
KRT in-kernel 10.1.1.2/32 -> {indirect(1048574)}
*Static Preference: 5
Next hop type: Indirect, Next hop index: 0
Address: 0xb39d1b0
Next-hop reference count: 2
Next hop type: Router, Next hop index: 581
Next hop: 12.1.1.2 via ge-2/0/1.0, selected
Session Id: 0x144
Next hop: 13.1.1.2 via ge-2/0/2.0, selected
Session Id: 0x145
Nexthop: 10.0.24.4 via lt-0/3/0.24
Chapter 42: Operational Commands
10.0.0.30
Import
Node path count: 1
2957