Juniper ACX1000 Configuration Manual page 3055

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Table 215: show route damping Output Fields (continued)
Field Name
Field Description
AS number of the local routing device.
Local AS
AS number of the peer routing device.
Peer AS
How long the route has been known.
Age
Metric for the route.
Metric
Name of the protocol that has added the route.
Task
List of protocols that announce this route.
Announcement bits
is used for route resolution for next hops found in the routing table.
used by Juniper Networks customer support only.
AS path through which the route was learned. The letters at the end of the AS
AS path
path indicate the path origin, providing an indication of the state of the route at
the point at which the AS path originated:
I
—IGP.
—EGP.
E
—Incomplete; typically, the AS path was aggregated.
?
When AS path numbers are included in the route, the format is as follows:
—Brackets enclose the local AS number associated with the AS path if
[ ]
more than one AS number is configured on the routing device or if AS path
prepending is configured.
—Braces enclose AS sets, which are groups of AS numbers in which the
{ }
order does not matter. A set commonly results from route aggregation. The
numbers in each AS set are displayed in ascending order.
—Parentheses enclose a confederation.
( )
( [ ] )
NOTE:
unrecognized attribute and associated hexadecimal value if BGP receives
attribute 128 (attribute set) and you have not configured an independent domain
in any routing instance.
to
Next hop to the destination. An angle bracket (>) indicates that the route is the
selected route.
Interface used to reach the next hop. If there is more than one interface available
via
to the next hop, the interface that is actually used is followed by the word
Selected
Community path attribute for the route. See the output field table for the
Communities
route detail
Local preference value included in the route.
Localpref
BGP router ID as advertised by the neighbor in the open message.
Router ID
Copyright © 2017, Juniper Networks, Inc.
—Parentheses and brackets enclose a confederation set.
In Junos OS Release 10.3 and later, the AS path field displays an
.
command.
indicates that the route
n-Resolve inet
is an index
n
Chapter 42: Operational Commands
Level of Output
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
All levels
brief
none
none
brief
show
detail extensive
All levels
detail extensive
2997

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents