Troubleshooting Poe Interfaces On Acx2000 Universal Access Routers - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Table 108: CT1 and CE1 Interface Alarms and Error Definitions (continued)
Alarm or Error
LOF
LOS
PCV
SEF
SEFS
SES
UAS
YLW

Troubleshooting PoE Interfaces on ACX2000 Universal Access Routers

Problem Description: A Power over Ethernet (PoE) interface is not supplying power to the powered
device.
Solution Check for the items shown in
Table 109: Troubleshooting a PoE Interface
Items to Check
Is interface PoE enabled?
Has PoE capability been disabled for that
interface?
Is the cable properly seated in the port socket?
Does the powered device require more power
than is available on the interface?
If the
the interface, check the history of power
consumption.
Related
Documentation
1402
Definitions
Loss of frame
Loss of signal
Path code violation
Severely errored frame
Severely errored frame seconds
Severely errored seconds
Unavailable seconds
Yellow alarm
Table 109 on page
option has been enabled for
telemetries
Understanding PoE on ACX Series Universal Access Routers on page 142
Example: Configuring PoE on ACX2000 Routers on page 144
Structure-Agnostic Interface Type
interfaces
ce1
ct1 and ce1 interfaces
N/A
N/A
N/A
ct1 and ce1 interfaces
and interfaces
ct1 ce1
N/A
1402.
Explanation
Only interfaces and
ge-0/1/3 ge-0/1/7
function as PoE ports.
Use the command to check
show poe interface
PoE interface status.
Check the hardware.
Use the show poe interface command to check
the maximum power provided by the interface.
Use the command to
show poe telemetries
display the history of power consumption.
Copyright © 2017, Juniper Networks, Inc.
Structure-Aware
and interfac
ct1 ce1
ct1 and ce1 interfac
and interfac
ct1 ce1
and interfac
ct1 ce1
ct1 and ce1 interfac
ct1 and ce1 interfac
and interfac
ct1 ce1
and interfac
ct1 ce1
can