Show Isis Route - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show isis route

List of Syntax
Syntax
Syntax (EX Series
Switches and QFX
Series)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
2702
Syntax on page 2702
Syntax (EX Series Switches and QFX Series) on page 2702
show isis route
<destination>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
<topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)>
show isis route
<destination>
<inet | inet6>
<instance instance-name>
<topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display the routes in the IS-IS routing table.
none—Display all routes in the IS-IS routing table for all supported address families for
all routing instances.
destination—(Optional) Destination address for the route.
inet | inet6—(Optional) Display inet (IPv4) or inet6 (IPv6) routes, respectively.
instance instance-name—(Optional) Display routes for the specified routing instance
only.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)—(Optional) Display
routes for the specified topology only, or use unicast to display information, if
available, for both IPv4 and IPv6 unicast topologies.
view
show isis route logical-system on page 2703
show isis route floodgroup on page 2703
show isis route (CLNS) on page 2704
show isis route on page 2704
Copyright © 2017, Juniper Networks, Inc.