Show Route All - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show route all

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
show route all
2982
Syntax on page 2982
Syntax (EX Series Switches) on page 2982
show route all
<logical-system (all | logical-system-name)>
show route all
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about all routes in all routing tables, including private, or internal,
tables.
none—Display information about all routes in all routing tables, including private, or
internal, tables.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route brief on page 2989
show route detail on page 3000
show route all on page 2982
In Junos OS Release 9.5 and later, only the output fields for the
display all routing tables, including private, or hidden, routing tables. The output field
table of the show route command does not display entries for private, or hidden, routing
tables in Junos OS Release 9.5 and later.
The following example displays a snippet of output from the
then displays the same snippet of output from the
user@host> show route
mpls.0: 7 destinations, 7 routes (5 active, 0 holddown, 2 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 2d 02:24:39, metric 1
show route all
command and
show route
show route all command:
Copyright © 2017, Juniper Networks, Inc.
command