Juniper ACX1000 Configuration Manual page 3031

show route active-path brief
show route active-path detail
Copyright © 2017, Juniper Networks, Inc.
> via lo0.0
10.255.71.50/32 *[IS-IS/15] 00:18:13, metric 10
> to 172.16.100.1 via so-2/1/3.0
172.16.100.1/24 *[Direct/0] 00:18:36
> via so-2/1/3.0
172.16.100.1/32 *[Local/0] 00:18:41
Local via so-2/1/3.0
192.168.64.0/21 *[Direct/0] 21:33:52
> via fxp0.0
192.168.70.19/32 *[Local/0] 21:33:52
Local via fxp0.0
The output for the
show route active-path brief
command. For sample output, see
route active-path
user@host> show route active-path detail
inet.0: 7 destinations, 7 routes (6 active, 0 holddown, 1 hidden)
10.255.70.19/32 (1 entry, 1 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 3
Next hop: via lo0.0, selected
State: ‹Active Int›
Local AS:
Age: 21:37:10
Task: IF
Announcement bits (3): 2-IS-IS 5-Resolve tree 2 6-Resolve tree 3
AS path: I
10.255.71.50/32 (1 entry, 1 announced)
*IS-IS Preference: 15
Level: 1
Next hop type: Router, Next hop index: 397
Next-hop reference count: 4
Next hop: 172.16.100.1 via so-2/1/3.0, selected
State: ‹Active Int›
Local AS:
Age: 21:31
Task: IS-IS
Announcement bits (4): 0-KRT 2-IS-IS 5-Resolve tree 2 6-Resolve
tree 3
AS path: I
172.16.100.0/24 (1 entry, 1 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 3
Next hop: via so-2/1/3.0, selected
State: ‹Active Int›
Local AS:
Age: 21:54
Task: IF
Announcement bits (3): 2-IS-IS 5-Resolve tree 2 6-Resolve tree 3
command is identical to that for the
show route active-path on page 2972
200
200
Metric: 10
200
Chapter 42: Operational Commands
show
.
2973