Juniper ACX1000 Configuration Manual page 3068

ACX Series Universal Access Router Configuration Guide
Table 219: Communities Output Field Values
Value
area-number
bandwidth: local AS
number:link-bandwidth-number
domain-id
domain-id-vendor
link-bandwidth-number
local AS number
options
origin
ospf-route-type
route-type-vendor
rte-type
3010
Table 218: State Output Field Values (continued)
Value
Secondary
Unusable path
Update source
Table 219 on page 3010 describes the possible values for the Communities output field.
Description
4 bytes, encoding a 32-bit area number. For AS-external routes, the value is
identifies the route as internal to the OSPF domain, and as within the identified area. Area
numbers are relative to a particular OSPF domain.
Link-bandwidth community value used for unequal-cost load balancing. When BGP has
several candidate paths available for multipath purposes, it does not perform unequal-cost
load balancing according to the link-bandwidth community unless all candidate paths have
this attribute.
Unique configurable number that identifies the OSPF domain.
Unique configurable number that further identifies the OSPF domain.
Link-bandwidth number: from
Local AS number: from
1
1 byte. Currently this is only used if the route type is
the field indicates that the route carries a type 2 metric.
(Used with VPNs) Identifies where the route came from.
1 byte, encoded as or
1 2
type 1 or a type 2 LSA);
3
for NSSA routes; or
7 129
Displays the area number, OSPF route type, and option of the route. This is configured using
the BGP extended community attribute
area-number:ospf-route-type:options
Displays the area number, OSPF route type, and option of the route. This is configured using
the BGP extended community attribute
area-number:ospf-route-type:options
Description
Route not a primary route.
Path is not usable because of one of the following conditions:
The route is damped.
The route is rejected by an import policy.
The route is unresolved.
Last tiebreaker is the lowest IP address value.
through
0 4,294,967,295
through .
65,535
or
5
for intra-area routes (depending on whether the route came from a
for summary routes; for external routes (area number must be
5
for sham link endpoint addresses.
. The format is
0x8000
.
. The format is
0x0306
.
. A nonzero value
0
(bytes per second).
. Setting the least significant bit in
7
Copyright © 2017, Juniper Networks, Inc.
);
0