Show Route Terse - Juniper ACX1000 Configuration Manual

show route terse

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 230: show route terse Output Fields
Field Name Field Description
routing-table-name Name of the routing table (for example, inet.0).
number destinations Number of destinations for which there are routes in the routing table.
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 3153
Syntax (EX Series Switches) on page 3153
show route terse
<logical-system (all | logical-system-name)>
show route terse
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display a high-level summary of the routes in the routing table.
NOTE: For BGP routes, the
preference attribute and MED instead of the metric1 and metric2 values. This
is mostly due to historical reasons.
To display the metric1 and metric2 value of a BGP route, use the
command.
extensive
none—Display a high-level summary of the routes in the routing table.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route terse on page 3155
Table 230 on page 3153 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 42: Operational Commands
show route terse command displays the local
show route terse
show route
command.
3153