Juniper ACX1000 Configuration Manual page 2728

ACX Series Universal Access Router Configuration Guide
Table 155: Aggregated Ethernet show interfaces Output Fields (continued)
Field Name Field Description
Information about the number of packets, packets per second, number of bytes,
Statistics
and bytes per second on this aggregate interface.
Bundle
Link
aggregate, including link state and input and output rates.
Adaptive Statistics
balancing counter statistics.
Adaptive Adjusts
by implementation of adaptive load balancing.
Adaptive Scans
of the AE bundle was scanned by for adaptive load balancing
Adaptive Tolerance
link utilization on each member link of the AE bundle.
Adaptive Updates
on an AE bundle.
Marker Statistics
marker protocol statistics on the specified links.
Marker Rx
on this aggregation port.
Resp Tx
port.
Unknown Rx
protocols Ethernet type value (43B.4) but contain an unknown PDU, or
are addressed to the slow protocols group MAC address (43B.3) but do
not carry the slow protocols Ethernet type.
Illegal Rx
Ethernet type value (43B.4) but contain a badly formed PDU or an illegal
value of protocol subtype (43B.4).
LACP info Link Aggregation Control Protocol (LACP) information for each aggregated
interface.
Role
Actor
Partner
System priority
administrative policy), encoded as an unsigned integer.
System identifier
Port priority
management or administrative policy), encoded as an unsigned integer.
Unknown Rx
Ethernet type value (43B.4) but contain an unknown protocol data unit (PDU),
or are addressed to the slow protocols group MAC address (43B.3) but do
not carry the slow protocols Ethernet type.
Port key
encoded as an unsigned integer.
2670
—Information about input and output bundle rates.
—( and only) Information about specific links in the
detail extensive
—( only) Information about adaptive load
extensive
—Number of times traffic flow imbalance was corrected
—Number of times the link utilization on each member link
—Tolerance level, in percentage, for load imbalance on
—Number of times traffic flow loads have been updated
—( and
detail extensive
—Number of valid marker protocol data units (PDUs) received
—Number of marker response PDUs transmitted on this aggregation
—Number of frames received that either carry the slow
—Number of frames received that carry the slow protocols
can be one of the following:
—Local device participating in LACP negotiation.
—Remote device participating in LACP negotiation.
—Priority assigned to the system (by management or
—Actor or partner system ID, encoded as a MAC address.
—Priority assigned to the port by the actor or partner (by
—Number of frames received that either carry the slow protocols
—Operational key value assigned to the port by the actor or partner,
only) Information about 802.3ad
Copyright © 2017, Juniper Networks, Inc.
Level of Output
none
detail extensive