Show Route Community-Name - Juniper ACX1000 Configuration Manual

show route community-name

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Sample Output
show route community-name
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2993
Syntax (EX Series Switches) on page 2993
show route community-name community-name
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route community-name community-name
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the route entries in each routing table that are members of a Border Gateway
Protocol (BGP) community, specified by a community name.
community-name—Name of the community.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route community-name on page 2993
For information about output fields, see the output field tables for the
command, the show route detail
the show route terse command.
user@host> show route community-name red-com
inet.0: 17 destinations, 17 routes (16 active, 0 holddown, 1 hidden)
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
instance1.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
red.inet.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.245.212/32 *[BGP/170] 00:04:40, localpref 100, from 10.255.245.204
AS path: 300 I
Chapter 42: Operational Commands
command, the show route extensive
show route
command, or
2993