Juniper ACX1000 Configuration Manual page 3149

show route output interface detail
show route output interface extensive
show route output interface terse
Copyright © 2017, Juniper Networks, Inc.
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
user@host> show route output interface so-0/1/2.0 detail
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
10.255.71.240/32 (1 entry, 1 announced)
*OSPF Preference: 10
Next-hop reference count: 2
Next hop: via so-0/1/2.0
Next hop: via so-0/3/2.0, selected
State: <Active Int>
Age: 14:52
Area: 0.0.0.0
Task: OSPF
Announcement bits (1): 0-KRT
AS path: I
10.255.71.241/32 (1 entry, 1 announced)
*OSPF Preference: 10
Next-hop reference count: 4
Next hop: via so-0/1/2.0, selected
State: <Active Int>
Age: 15:02
Area: 0.0.0.0
Task: OSPF
Announcement bits (1): 0-KRT
AS path: I
...
The output for the show route output interface extensive
the
show route output interface detail
output interface detail on page
user@host> show route output interface so-0/1/2.0 terse
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf
* 10.255.71.240/32 O
* 10.255.71.241/32 O
* 172.16.14.0/24
* 172.16.16.0/24
* 172.16.36.0/24
O
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
Metric: 2
Metric: 1
command. For sample output, see
3091.
Metric 1 Metric 2
10 2
10 1
O 10 3
O 10 2
D 0
10 1
Chapter 42: Operational Commands
command is identical to that of
show route
Next hop AS path
so-0/1/2.0
>so-0/3/2.0
>so-0/1/2.0
35.1.1.2
>so-0/1/2.0
so-0/3/2.0
>so-0/1/2.0
>so-0/1/2.0
>so-0/1/2.0
3091