Juniper ACX1000 Configuration Manual page 2958

ACX Series Universal Access Router Configuration Guide
Table 199: show ppp interface Output Fields (continued)
Field Name Field Description
LCP LCP information:
State
Ack-rcvd
Ack-sent
Configure-Ack has not yet been received.
Closed
Opened
Req-sent
State
Ack-rcvd
Ack-sent
Configure-Ack has not yet been received.
Closed
Closing
received.
Opened
sent and received.
Req-sent
has been sent but a Configure-Ack has not yet been received.
Starting
(Down).
Stopped
or after sending a Terminate-Ack.
Stopping
received.
Last started
Last completed
2900
—LCP protocol state (all platforms except M120 and M320 routers):
—A Configure-Request has been sent and a Configure-Ack has been received.
—A Configure-Request and a Configure-Ack have both been sent, but a
—Link is not available for traffic.
—Link is administratively available for traffic.
—An attempt has been made to configure the connection.
—LCP protocol state (M120 and M320 routers):
—A Configure-Request has been sent and a Configure-Ack has been received.
—A Configure-Request and a Configure-Ack have both been sent, but a
—Link is available (up), but no Open has occurred.
—A Terminate-Request has been sent but a Terminate-Ack has not yet been
—Link is administratively available for traffic. A Configure-Ack has been both
—An attempt has been made to configure the connection. A Configure-Request
—An administrative Open has been initiated, but the lower layer is still unavailable
—The system is waiting for a Down event after the This-Layer-Finished action,
—A Terminate-Request has been sent but a Terminate-Ack has not yet been
—LCP state start time.
—LCP state completion time.
Level of
Output
extensive
Copyright © 2017, Juniper Networks, Inc.