Juniper ACX1000 Configuration Manual page 2882

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
2824
brief | detail | extensive | summary—(Optional) Display the specified level of output.
advertising-router (address | self)—(Optional) Display the LSAs advertised either by a
particular routing device or by this routing device.
area area-id—(Optional) Display the LSAs in a particular area.
external—(Optional) Display external LSAs.
instance instance-name—(Optional) Display all OSPF database information under the
named routing instance.
inter-area-prefix—(Optional) Display information about interarea-prefix LSAs.
inter-area-router—(Optional) Display information about interarea-router LSAs.
intra-area-prefix—(Optional) Display information about intra-area-prefix LSAs.
link—(Optional) Display information about link LSAs.
link-local—(Optional) Display information about link-local LSAs.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
lsa-id lsa-id—(Optional) Display the LSA with the specified LSA identifier.
network—(Optional) Display information about network LSAs.
nssa—(Optional) Display information about not-so-stubby area (NSSA) LSAs.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(Optional) Display information
about the specified OSPFv3 realm, or address family. Use the
an address family other than IPv6 unicast, which is the default.
router—(Optional) Display information about router LSAs.
view
clear (ospf | ospf3) database
show ospf3 database brief on page 2829
show ospf3 database extensive on page 2830
show ospf3 database summary on page 2832
Table 185 on page 2825 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
option to specify
realm
show ospf3 database command.
Copyright © 2017, Juniper Networks, Inc.