Show Protection-Group Ethernet-Ring Interface - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show protection-group ethernet-ring interface

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
2920
show protection-group ethernet-ring interface
Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers.
Displays the status of the Automatic Protection Switching (APS) interfaces on an Ethernet
ring.
This command has no options.
view
show protection-group ethernet-ring data-channel
show protection-group ethernet-ring aps on page 2916
show protection-group ethernet-ring node-state on page 2923
show protection-group ethernet-ring statistics on page 2927
show protection-group ethernet-ring vlan on page 2932
show protection-group ethernet-ring interface (EX Series Switch Owner
Node) on page 2921
show protection-group ethernet-ring interface (Owner Node MX Series Router
) on page 2921
show protection-group ethernet-ring interface detail (Owner Node MX Series Router
) on page 2921
show protection-group ethernet-ring interface (EX Series Switch Ring Node) on page 2922
show protection-group ethernet-ring interface detail (ACX Series and MX
Series) on page 2922
Table 203 on page 2920 lists the output fields for both the EX Series switch, and the ACX
Series and MX Series router
Output fields are listed in the approximate order in which they appear.
Table 203: MX Series Routers show protection-group ethernet-ring
interface Output Fields
Field Name
Ethernet ring port parameters for
protection group group-name
Interface
show protection-group ethernet-ring interface
Field Description
Output is organized by configured protection group.
Physical interfaces configured for the Ethernet ring. This can
be an aggregated Ethernet link also.
commands.
Copyright © 2017, Juniper Networks, Inc.