Show Route Extensive - Juniper ACX1000 Configuration Manual

show route extensive

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 221: show route extensive Output Fields
Field Name Field Description
Name of the routing table (for example, inet.0).
routing-table-name
Number of destinations for which there are routes in the routing table.
number destinations
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 3025
Syntax (EX Series Switches) on page 3025
show route extensive
<destination-prefix>
<logical-system (all | logical-system-name)>
show route extensive
<destination-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display extensive information about the active entries in the routing tables.
none—Display all active entries in the routing table.
destination-prefix—(Optional) Display active entries for the specified address or range
of addresses.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route extensive on page 3032
show route extensive (Access Route) on page 3039
show route extensive (BGP PIC Edge) on page 3039
show route extensive (FRR and LFA) on page 3040
show route extensive (IS-IS) on page 3041
show route extensive (Route Reflector) on page 3041
show route label detail (Multipoint LDP Inband Signaling for Point-to-Multipoint
LSPs) on page 3041
show route label detail (Multipoint LDP with Multicast-Only Fast Reroute) on page 3042
Table 221 on page 3025 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 42: Operational Commands
command.
show route extensive
3025