Juniper ACX1000 Configuration Manual page 2758

ACX Series Universal Access Router Configuration Guide
Table 159: show isis overview Output Fields (continued)
Field Name Field Description
Preference value of external routes.
External route
preference
Number of prefixes allowed to be exported, as configured by the
Prefix export limit
Number of prefixes exported.
Prefix export count
Wide area metrics capability is enabled.
Wide area metrics are
enabled
Narrow metrics capability is enabled.
Narrow metrics are
enabled
IS-IS adjacencies come up one after another when adjacency holddown is enabled.
Adjacency holddown is
active
Sample Output
show isis overview
2700
user@host> show isis overview
Instance: master
Router ID: 10.255.107.183
Hostname: pro-bng3-a
Sysid: 0192.0168.0001
Areaid: 49.0002
Adjacency holddown: enabled
Maximum Areas: 3
LSP life time: 1200
Filter low life time LSPs up to: 300
Attached bit evaluation: enabled
SPF delay: 200 msec, SPF holddown: 5000 msec, SPF rapid runs: 3
IPv4 is enabled, IPv6 is enabled
Micro-loop avoidance: Enabled
Method: Route Convergence Delay, Route convergence delay: 5000 msec
Traffic engineering: enabled
Restart: Disabled
Helper mode: Enabled
Level 1
Internal route preference: 15
External route preference: 160
Wide metrics are enabled, Narrow metrics are enabled
Adjacency holddown is active
Level 2
Internal route preference: 18
External route preference: 165
Prefix export limit: 5, Prefix export count: 5
Wide metrics are enabled
Adjacency holddown is active
user@host> show isis overview logical-system R2
statement.
prefix-export-limit
Copyright © 2017, Juniper Networks, Inc.