Show Pfe Tcam Usage - Juniper ACX1000 Configuration Manual

show pfe tcam usage

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
show pfe tcam usage (all-tcam-stages | app | tcam-stage)
show pfe tcam usage all-tcam-stages detail
show pfe tcam usage app
show pfe tcam usage app <application-name> detail | shared-usage
show pfe tcam usage tcam-stage (ingress | egress | pre-egress)
show pfe tcam usage tcam-stage ingress app <application-name>
show pfe tcam usage tcam-stage egress app <application-name>
show pfe tcam usage tcam-stage pre-egress app <application-name>
Command introduced in Junos OS Release 15.1X54–D20 for ACX5048 and ACX5096
routers.
Display the TCAM resource usage for an application and stages (egress, ingress, and
pre-ingress).
all-tcam-stages—Display the TCAM resource usage for all stages (egress, ingress, and
pre-ingress).
app—Display the TCAM resource usage for an application.
tcam-stage—Display the TCAM resource usage for a stage (egress, ingress, and
pre-ingress) and its application.
detail—Display the TCAM resource usage for an application in detail.
shared-usage—Display the TCAM resource usage for an application along with its other
shared application.
view
Dynamic Ternary Content Addressable Memory Overview on page 1157
show pfe tcam usage app <application-name> on page 2871
show pfe tcam usage app <application-name> detail on page 2871
show pfe tcam usage app <application-name> shared-usage on page 2871
show pfe tcam usage all-tcam-stages on page 2872
show pfe tcam usage all-tcam-stages detail on page 2872
show pfe tcam usage tcam-stage ingress on page 2873
show pfe tcam usage tcam-stage ingress app <application-name> on page 2873
show pfe tcam usage tcam-stage ingress app <application-name> detail on page 2874
show pfe tcam usage tcam-stage ingress detail on page 2874
show pfe tcam usage tcam-stage ingress detail on page 2875
Table 193 on page 2870 lists the output fields for the
fields are listed in the approximate order in which they appear.
Chapter 42: Operational Commands
show pfe tcam usage command. Output
2869