Juniper ACX1000 Configuration Manual page 2983

Sample Output
show protection-group ethernet-ring node-state (MX Series Router - RPL Owner Node, Normal Operation)
show protection-group ethernet-ring node-state (MX Series Router - Normal Ring Node, Normal Operation)
show protection-group ethernet-ring node-state (MX Series Router - RPL Owner Node, Remote Failure Condition)
show protection-group ethernet-ring node-state detail (ACX Series and MX Series Router)
show protection-group ethernet-ring node-state detail (MX Series Router - RPL Owner Node, Normal Operation)
Copyright © 2017, Juniper Networks, Inc.
Table 204: show protection-group ethernet-ring node-state Output
Fields (continued)
Field Name
Op State / Operational
State
user@host> show protection-group ethernet-ring node-state
Ethernet ring APS State
Timer Operation state
pg101 idle
operational
pg102 idle
operational
user@host> show protection-group ethernet-ring node-state
Ethernet ring APS State
pg102 idle
WTR Timer WTB Timer Guard Timer
disabled disabled disabled
user@host> show protection-group ethernet-ring node-state
Ethernet ring APS State
pg101 protected
WTR Timer WTB Timer Guard Timer
disabled disabled disabled
user@host> show protection-group ethernet-ring node-state detail
Ethernet-Ring name
APS State
Event
Ring Protection Link Owner
Wait to Restore Timer
Wait to Block Timer
Guard Timer
Operation state
user@host> show protection-group ethernet-ring node-state detail
Ethernet-Ring name
APS State
Event
Ring Protection Link Owner
Field Description
State of the node:
Operational
Event RPL Owner
NR-RB Yes
NR-RB No
Event RPL Owner
NR-RB No
Operation state
operational
Event RPL Owner
remote SF Yes
Operation state
operational
: Erp_1
: idle
: NR-RB
: No
: disabled
: disabled
: disabled
: operational
: pg101
: idle
: NR-RB
: Yes
Chapter 42: Operational Commands
or .
any internal wait state.
WTR Timer WTB Timer Guard
disabled disabled disabled
disabled disabled disabled
2925