Show Path-Computation-Client Active-Pce - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show path-computation-client active-pce

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 195: show path-computation-client active-pce Output Fields
Field Name Field Description
IP address IP address of the current active PCE.
Priority Active PCE priority.
PCE status Active PCE state:
PCE_STATE_NEW— Initial PCEP session state.
PCE_STATE_RECONNECT—Trying to re-establish TCP connection with the PCEP peer.
PCE_STATE_CONNECTING—Establishing TCP connection with the PCEP peer.
PCE_STATE_CONNECTED—TCP connection established with the PCEP peer.
PCE_STATE_SYNC—Open messages exchanged with the PCEP peer and entering
SYNC state.
PCE_STATE_UP—PCEP session established.
2884
show path-computation-client active-pce
<brief | detail>
Command introduced in Junos OS Release 12.3.
Command introduced in Junos OS Release 16.1R3 for QFX10000 switches.
Command introduced in Junos OS Release 17.1R1 for ACX Series routers.
Displays information about the current active Path Computation Element (PCE).
none—Display brief information about the current active PCE.
brief | detail—(Optional) Display the specific level of output.
view
request path-computation-client active-pce on page 1806
show path-computation-client active-pce on page 2886
show path-computation-client active-pce detail on page 2887
Table 195 on page 2884 describes the output fields for the
active-pce command. Output fields are listed in the approximate order in which they
appear.
show path-computation-client
Level of Output
All levels
All levels
All levels
Copyright © 2017, Juniper Networks, Inc.