Juniper ACX1000 Configuration Manual page 2894

ACX Series Universal Access Router Configuration Guide
Table 186: show (ospf | ospf3) interface Output Fields (continued)
Field Name Field Description
Indicates that this interface is configured as a secondary interface for this area.
Secondary
This interface can belong to more than one area, but can be designated as a
primary interface for only one area.
Flood Reduction Indicates that this interface is configured with flooding reduction. All
self-originated LSAs from this interface are initially sent with the
set. As a result, LSAs are refreshed only when a change occurs.
Router priority used in designated router (DR) election on this interface.
Priority
List of link-state advertisements (LSAs) that might be about to flood this
Flood list
interface.
Ack list Acknowledgment list. List of pending acknowledgments on this interface.
Descriptor list List of packet descriptors.
Hello Configured value for the hello timer.
Dead Configured value for the dead timer.
Auth type (OSPFv2) Authentication mechanism for sending and receiving OSPF protocol
packets:
MD5
None
Password
Topology (Multiarea adjacency) Name of topology:
(OSPFv2 and LDP synchronization) Current state of LDP synchronization:
LDP sync state
sync , in holddown
reason (OSPFv2 and LDP synchronization) Reason for the current state of LDP
synchronization. The LDP session might be up or down, or adjacency might be
up or down.
(OSPFv2 and LDP synchronization) Configured value of the hold timer.
config holdtime
If the state is not synchronized, and the hold time is not infinity, the
field displays the number of seconds that remain until the configured hold timer
expires.
IPSec SA name (OSPFv2) Name of the IPSec security association name.
Active key ID (OSPFv2 and MD5) Number from
2836
—The MD5 mechanism is configured in accordance with RFC 2328.
—No authentication method is configured.
—A simple password (RFC 2328) is configured.
, and not supported
0 to
DoNotAge
default or name .
.
255 that uniquely identifies an MD5 key.
Level of Output
detail extensive
extensive
bit
detail extensive
extensive
extensive
extensive
detail extensive
detail extensive
detail extensive
in extensive
extensive
extensive
remaining
detail extensive
detail extensive
Copyright © 2017, Juniper Networks, Inc.