Show Route Inactive-Prefix - Juniper ACX1000 Configuration Manual

show route inactive-prefix

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Sample Output
show route inactive-prefix
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 3069
Syntax (EX Series Switches) on page 3069
show route inactive-prefix
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route inactive-prefix
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display inactive route destinations in each routing table.
none—Display all inactive route destination.
brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route inactive-prefix on page 3069
show route inactive-prefix detail on page 3070
show route inactive-prefix extensive on page 3070
show route inactive-prefix terse on page 3070
For information about output fields, see the output field tables for the
command, the show route detail
the show route terse command.
user@host> show route inactive-prefix
inet.0: 14 destinations, 14 routes (13 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
127.0.0.1/32 [Direct/0] 00:04:54
> via lo0.0
Chapter 42: Operational Commands
command, the show route extensive
show route
command, or
3069