Juniper ACX1000 Configuration Manual page 3104

ACX Series Universal Access Router Configuration Guide
Description
Options
3046
Option introduced in Junos OS Release 8.4
learning-vlan-id
Options and introduced in Junos OS Release 9.6.
all vlan
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display the Routing Engine's forwarding table, including the network-layer prefixes and
their next hops. This command is used to help verify that the routing protocol process
has relayed the correction information to the forwarding table. The Routing Engine
constructs and maintains one or more routing tables. From the routing tables, the Routing
Engine derives a table of active routes, called the forwarding table.
NOTE: The Routing Engine copies the forwarding table to the Packet
Forwarding Engine, the part of the router that is responsible for forwarding
packets. To display the entries in the Packet Forwarding Engine's forwarding
table, use the
show pfe route
none—Display the routes in the forwarding tables. By default, the
command does not display information about private, or internal,
forwarding-table
forwarding tables.
detail | extensive | summary—(Optional) Display the specified level of output.
all—(Optional) Display routing table entries for all forwarding tables, including private,
or internal, tables.
bridge-domain (all | bridge-domain-name)—(MX Series routers only) (Optional) Display
route entries for all bridge domains or the specified bridge domain.
ccc interface-name—(Optional) Display route entries for the specified circuit
cross-connect interface.
destination destination-prefix—(Optional) Destination prefix.
family family—(Optional) Display routing table entries for the specified family:
(ccc | destination | detail | extensive | interface-name | label | learning-vlan-id | matching
| multicast | summary | table | vlan | vpn)
, , ,
fmembers inet inet6
satellite-inet6 , satellite-vpls
interface-name interface-name—(Optional) Display routing table entries for the specified
interface.
label name—(Optional) Display route entries for the specified label.
lcc number—(TX Matrix and TX matrix Plus routers only) (Optional) On a routing matrix
composed of a TX Matrix router and T640 routers, display information for the
specified T640 router (or line-card chassis) connected to the TX Matrix router. On
a routing matrix composed of the TX Matrix Plus router and T1600 or T4000 routers,
command.
,
ethernet-switching
, ,
iso mcsnoop-inet mcsnoop-inet6
, tnp , unix , vpls , or vlan-classification
show route
bridge
, ,
evpn fibre-channel
, , ,
mpls satellite-inet
.
Copyright © 2017, Juniper Networks, Inc.
,