Show Ppp Interface - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show ppp interface

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 199: show ppp interface Output Fields
Field Name Field Description
Name of the logical interface on which the session is running.
Session
Session type: PPP.
Type
PPP process phase:
Phase
Special conditions present in the session:
Session flags
and
NCP-only
Protocol state information. See specific protocol state fields for information.
protocol State
AUTHENTICATION Challenge-Handshake Authentication Protocol (CHAP) authentication state information or
Password Authentication Protocol (PAP) state information. See the
description for further information.
2898
show ppp interface interface-name
<extensive| terse>
Command introduced in Junos OS Release 7.5.
Display information about PPP interfaces.
interface-name—Name of a logical interface.
extensive | terse—(Optional) Display the specified level of output.
view
show ppp interface on page 2906
show ppp interface extensive on page 2906
show ppp interface terse on page 2906
Table 199 on page 2898 lists the output fields for the
fields are listed in the approximate order in which they appear.
,
Authenticate Pending
.
show ppp interface
, , , ,
Establish LCP Network Disabled
, , ,
Bundled TCC No-keepalives Looped
Authentication
Copyright © 2017, Juniper Networks, Inc.
command. Output
Level of
Output
All levels
All levels
, and . All levels
Tunneled
, , All levels
Monitored
None
specified
None
field specified