Juniper ACX1000 Configuration Manual page 3180

ACX Series Universal Access Router Configuration Guide
Table 226: show route table Output Fields (continued)
Field Name Field Description
Primary Routing Table In a routing table group, the name of the primary routing table in which the route resides.
Secondary Tables In a routing table group, the name of one or more secondary tables in which the route resides.
3122
Table 217 on page 3006 describes all possible values for the Next-hop Types output field.
Table 227: Next-hop Types Output Field Values
Next-Hop Type
Broadcast (bcast)
Deny
Discard
Flood
Hold
Indexed (idxd)
Indirect (indr)
Interface
Local (locl)
Multicast (mcst)
Multicast discard (mdsc)
Multicast group (mgrp)
Receive (recv)
Reject (rjct)
Description
Broadcast next hop.
Deny next hop.
Discard next hop.
Flood next hop. Consists of components called branches,
up to a maximum of 32 branches. Each flood next-hop
branch sends a copy of the traffic to the forwarding
interface. Used by point-to-multipoint RSVP,
point-to-multipoint LDP, point-to-multipoint CCC, and
multicast.
Next hop is waiting to be resolved into a unicast or
multicast type.
Indexed next hop.
Used with applications that have a protocol next hop
address that is remote. You are likely to see this next-hop
type for internal BGP (IBGP) routes when the BGP next
hop is a BGP neighbor that is not directly connected.
Used for a network address assigned to an interface. Unlike
the router next hop, the interface next hop does not
reference any specific node on the network.
Local address on an interface. This next-hop type causes
packets with this destination address to be received locally.
Wire multicast next hop (limited to the LAN).
Multicast discard.
Multicast group member.
Receive.
Discard. An ICMP unreachable message was sent.
Copyright © 2017, Juniper Networks, Inc.