Juniper ACX1000 Configuration Manual page 2928

ACX Series Universal Access Router Configuration Guide
Table 193: show pfe tcam usage Output Fields
Field Name Field Description
App name Name of the application using the TCAM resource
Related-App-Name Name of the related applications for an application using the TCAM resource.
Precedence Application priority
State Status of the application. The status can be OK or FAILED.
Tcam-stage Describes the stage (egress, ingress, and pre-ingress)
Group Logical representation of one or more tcam-slices.
NOTE:
lookup can happen in parallel.
Mode Defines the matching capability of a given group. The following are the possible
values for Mode:
SINGLE—TCAM space is single-wide. Single-wide modes is used to configure
a TCAM entry from a single TCAM slice.
DOUBLE—TCAM space mode is double-wide. Double-wide mode is used to
configure two TCAM slices using one TCAM entry from each TCAM slice.
DOUBLE(I)—TCAM space mode is double-wide intra-slice. Double-wide
intra-slice mode is used to configure a TCAM slice to use two TCAM entries
as a single entry.
Tcam-Entries TCAM resource used by an application to achieve the functionality of the
application.
Counters Counter resource used by an application.
Policers Policer resource used by an application.
Free Available TCAM space.
Used Number of resources used by application or group.
Errors Number of errors occurred due to shortage of TCAM resources.
Resource-Shortage Shortage of TCAM resources for an application.
Allocated Number of TCAM resources allocated for a group.
Available Number of available TCAM resources for a group.
Hw grps used Number of TCAM slices used by the group.
Tcam apps Number of TCAM applications for a group.
2870
Tcam-slice represents the hardware TCAM block, where the TCAM
Copyright © 2017, Juniper Networks, Inc.