Juniper ACX1000 Configuration Manual page 3007

Table 212: show ptp statistics Output Fields (continued)
Field Name
Signalling
Announce
Sync
Delay
Error
Sample Output
show ptp statistics
show ptp statistics (with IPv6 addresses for PTP master/slave)
show ptp statistics detail
Copyright © 2017, Juniper Networks, Inc.
Field Description
Packet count for signalling messages:
Rx—Number of packets received.
Tx—Number of packets transmitted.
Packet count for announce messages:
Rx—Number of packets received.
Tx—Number of packets transmitted.
Packet count for synchronization messages:
Rx—Number of packets received.
Tx—Number of packets transmitted.
Packet count for delay request or response messages:
Rx—Number of packets received.
Tx—Number of packets transmitted.
Packet count for signal loss errors:
Rx—Number of packets received with errors.
Tx—Number of packets transmitted with errors.
user@host> show ptp statistics
Local Address Remote Address
2.2.2.2 10.10.20.50
6.6.6.2 6.6.6.1
user@host> show ptp statistics
Local Clock Remote Clock
Received Transmitted
ge-0/1/5.0
727205 345698
ge-0/2/0.0
4493776 2222524
user@host> show ptp statistics detail
Local Address Remote Address
2.2.2.2 10.10.20.50
Signalling Announce
Rx: 5
Tx: 45
Role Stream
Slave 0
Master 4
2001:cdba:0000:0000:0000:0000:3257:9653 Master
2001:cdba:0000:0000:0000:0000:3256:0101 Master
Role Stream
Slave 0
Sync
184 23399
0 0
Chapter 42: Operational Commands
Received Transmitted
45716 22826
24960 74880
Role Stream
Received Transmitted
47009 23470
Delay Error
23426 0
23426 0
4
5
2949