Show Ppp Summary - Juniper ACX1000 Configuration Manual

show ppp summary

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Sample Output
show ppp summary
Copyright © 2017, Juniper Networks, Inc.
show ppp summary
Command introduced in Junos OS Release 7.5.
Display PPP session summary information.
This command has no options.
view
show ppp summary on page 2907
Table 200 on page 2907 lists the output fields for the
fields are listed in the approximate order in which they appear.
Table 200: show ppp summary Output Fields
Field Name
Interface
Session type
Session phase
Session flags
user@host> show ppp summary
Interface Session type
at-4/0/0.456 PPP
lsq-0/3/0.0 PPP
lsq-1/0/0.0 PPP
rlsq0.0 PPP
so-1/0/0.0 PPP
so-1/0/1.0 PPP
so-2/0/0.0 Cisco-HDLC
so-4/0/0.0 PPP
t1-1/3/0:1.0 PPP
t1-1/3/0:2.0 PPP
pp0.12 PPP
show ppp summary
Field Description
Interface on which the PPP session is running. An interface type of
pp0 indicates an Ethernet interface type on a M120 or M320 router.
Type of session: or
PPP Cisco-HDLC
PPP process phases:
Authenticate
.
Disabled
Special conditions present in the session, such as
, ,
No-keepalives Looped Monitored
Session phase Session flags
Network
Disabled
Disabled
Network NCP-only
Authenticate
Disabled Looped
Establish
Establish Monitored
Network Bundled
Network Bundled
Network
Chapter 42: Operational Commands
command. Output
.
, , , ,
Pending Establish Network
,
Bundled TCC
, and .
NCP-only
,
2907