Juniper ACX1000 Configuration Manual page 2858

ACX Series Universal Access Router Configuration Guide
show oam ethernet connectivity-fault-
management mep-database (enhanced continuity measurement)
2800
Maintenance association name: ma1, Format: string
Continuity-check status: enabled, Interval: 1s, Loss-threshold: 3 frames
MEP identifier: 1, Direction: down, MAC address: 00:14:f6:b6:01:fe
Auto-discovery: enabled, Priority: 0
Interface name: ge-1/0/0.0, Interface status: Active, Link status: Up
Defects:
Remote MEP not receiving CCM
Erroneous CCM received
Cross-connect CCM received
RDI sent by some MEP
Statistics:
CCMs sent
CCMs received out of sequence
LBMs sent
Valid in-order LBRs received
Valid out-of-order LBRs received
LBRs received with corrupted data
LBRs sent
LTMs sent
LTMs received
LTRs sent
LTRs received
Sequence number of next LTM request
1DMs sent
Valid 1DMs received
Invalid 1DMs received
DMMs sent
DMRs sent
Valid DMRs received
Invalid DMRs received
LMM sent
Valid LMM received
Invalid LMM received
LMR sent
Valid LMR received
Invalid LMR received
SLM sent
Valid SLM received
Invalid SLM received
SLR sent
Valid SLR received
Invalid SLR received
Remote MEP count
Identifier MAC address
2 00:12:1e:fb:ea:7d
user@host> show oam ethernet connectivity-fault-management mep-database
maintenance-domain md5 maintenance-association ma5 local-mep 2001 remote-mep 1001
Maintenance domain name: md5, Format: string, Level: 5
Maintenance association name: ma5, Format: string
Continuity-check status: enabled, Interval: 100ms, Loss-threshold: 3 frames
MEP identifier: 2001, Direction: down, MAC address: 00:19:e2:b2:81:4a
Auto-discovery: enabled, Priority: 0
Interface status TLV: up, Port status TLV: up
: no
: no
: no
: no
: 328703
: 0
: 85
: 78
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 10
: 10
: 0
: 20
: 0
: 10
: 0
: 10
: 20
: 0
: 20
: 10
: 0
: 10
: 20
: 0
: 20
: 10
: 0
: 1
State Interface
ok ge-1/0/0.0
Copyright © 2017, Juniper Networks, Inc.