Juniper ACX1000 Configuration Manual page 2736

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

ACX Series Universal Access Router Configuration Guide
List of Sample Output
Output Fields
Table 156: show isis database Output Fields
Field Name
Field Description
Name of the interface on which the link-state PDU has been received; always
Interface name
IS-IS
for this command.
level
Level of intermediate system:
1
—Intermediate system routes within an area; when the destination is outside
an area, it routes toward a Level 2 system.
—Intermediate system routes between areas and toward other ASs.
2
LSP ID
Link-state PDU identifier.
Sequence
Sequence number of the link-state PDU.
Checksum
Checksum value of the link-state PDU.
Lifetime (secs)
Remaining lifetime of the link-state PDU, in seconds.
Attributes
Attributes of the specified database:
# LSPs
Total number of link-state PDUs in the specified link-state database.
IP prefix
Prefix advertised by this link-state PDU.
IS neighbor
IS-IS neighbor of the advertising system.
IP prefix
IPv4 prefix advertised by this link-state PDU.
V6 prefix
IPv6 prefix advertised by this link-state PDU.
Metric
Metric of the prefix or neighbor.
Header
LSP ID
Length
Allocated Length
Router ID
Remaining Lifetime
2678
show isis database on page 2679
show isis database brief on page 2680
show isis database detail on page 2680
show isis database extensive on page 2681
Table 156 on page 2678
describes the output fields for the
Output fields are listed in the approximate order in which they appear. Fields that contain
internal IS-IS information useful only in troubleshooting obscure problems are not
described in the table. For more details about these fields, contact your customer support
representative.
—Link state PDU identifier of the header.
—Header length.
—Amount of length available for the header.
—Address of the local routing device.
—Remaining lifetime of the link-state PDU, in seconds.
,
,
, or
(L1 only).
L1
L2
Overload
Attached
command.
show isis database
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
none
brief
none
brief
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
extensive
Copyright © 2017, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents