show isis hostname
List of Syntax
Syntax
Syntax (EX Series
Switches and QFX
Series)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2691
Syntax (EX Series Switches and QFX Series) on page 2691
show isis hostname
<logical-system (all | logical-system-name)>
show isis hostname
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display IS-IS hostname database information.
This command displays the system ID-to-name cache. The output shows if the mapping
has been learned by receipt of a Hostname TLV #137 (type dynamic) configured in Junos
OS with the
set system host-name
with the
set system static-host-mapping hostname sysid
local router always has its type set to static even if
none—Display IS-IS hostname database information.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show isis hostname on page 2692
Table 157 on page 2691
describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 157: show isis hostname Output Fields
Field Name
System Id
Hostname
command, or a static mapping defined in Junos OS
static-host-mapping
Field Description
System identifier mapped to the hostname.
Hostname mapped to the system identifier.
Chapter 42: Operational Commands
command (type static). The
is not configured.
command.
show isis hostname
2691