Juniper ACX1000 Configuration Manual page 2906

ACX Series Universal Access Router Configuration Guide
Table 189: show (ospf | ospf3) neighbor Output Fields (continued)
Field Name Field Description
(OSPFv3 only) If the neighbor uses virtual links, the
Neighbor-address
site-local, local, or global address. If the neighbor uses a physical interface, the
Neighbor-address
Area that the neighbor is in.
area
(OSPFv3 only) Displays the OSPFv3 interface index.
OSPF3-Intf-Index
Option bits received in the hello packets from the neighbor.
opt
or Address of the designated router.
DR DR-ID
or Address of the backup designated router.
BDR BDR-ID
Length of time since the neighbor came up.
Up
adjacent Length of time since the adjacency with the neighbor was established.
SPRING Adjacency Segment routing in networking adjacency labels.
Labels
NOTE:
Label Segment routing label.
Segment routing flags. Flags VL indicate value and local.
Flags
Sample Output
show ospf neighbor brief
show ospf neighbor detail
2848
is an IPv6 link-local address.
Displayed only when segment routing is enabled
user@host> show ospf neighbor brief
Address Intf
192.168.254.225 fxp3.0
192.168.254.230 fxp3.0
192.168.254.229 fxp3.0
10.1.1.129 fxp2.0
10.1.1.131 fxp2.0
10.1.2.1 fxp1.0
10.1.2.81 fxp0.0
user@host> show ospf neighbor detail
Address Interface
10.0.6.60 lt-1/2/0.12
Area 0.0.0.0, opt 0x52, DR 0.0.0.0, BDR 0.0.0.0
Up 23:53:47, adjacent 23:53:34
SPRING Adjacency Labels:
Label Flags
is the
Neighbor-address
State ID
2Way 10.250.240.32
Full 10.250.240.8
Full 10.250.240.35
Full 10.250.240.12
Full 10.250.240.11
Full 10.250.240.9
Full 10.250.240.10
State ID
Full 1.1.1.60
Copyright © 2017, Juniper Networks, Inc.
Level of Output
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
Pri Dead
128 36
128 38
128 33
128 37
128 38
128 32
128 33
Pri Dead
128 38