Show Ppp Statistics - Juniper ACX1000 Configuration Manual

show ppp statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 201: show ppp statistics Output Fields
Field Name Field Description
Total sessions Number of PPP sessions on an interface.
Copyright © 2017, Juniper Networks, Inc.
show ppp statistics
<detail>
<memory>
<recovery>
Command introduced in Junos OS Release 7.5.
Display PPP interface statistics information.
detail—(Optional) Display the detailed statistics.
memory—(Optional) Display PPP process memory statistics.
recovery—(Optional) Display recovery state of PPP after a GRES or restart. It is safe to
force another GRES or restart only when the recovery state indicates the recovery
is done.
NOTE: When you issue this command option during the recovery process,
the command may time out or fail silently rather than display output.
Recovery is not complete until the command displays
recovery done
view
show ppp statistics on page 2914
show ppp statistics detail on page 2914
show ppp statistics recovery (Safe to Restart) on page 2915
show ppp statistics recovery (Unsafe to Restart) on page 2915
Table 201 on page 2909 lists the output fields for the
fields are listed in the approximate order in which they appear.
.
show ppp statistics
Chapter 42: Operational Commands
Recovery state:
command. Output
Level of Output
none detail
2909