Show Validation Group - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show validation group

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 236: show validation group Output Fields
Field Name
Group
Maximum sessions
Session
State
3184
show validation group
<instance instance-name>
<logical-system logical-system-name>
Command introduced in Junos OS Release 12.2.
Display information about route validation redundancy groups.
none—Display information about all route validation groups.
instance instance-name—(Optional) Display information about route validation groups
for the specified routing instance. The instance name can be master for the main
instance, or any valid configured instance name or its prefix.
logical-system logical-system-name—(Optional) Perform this operation on a particular
logical system.
view
Use Case and Benefit of Origin Validation
Understanding Origin Validation for BGP
Example: Configuring Origin Validation for BGP
show validation group on page 3185
Table 236 on page 3184 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
Group name.
Number of concurrent sessions for each group. The default is 2. The number
is configurable with the
Resource public key infrastructure (RPKI) cache session IP address.
State of the connection between the routing device and the cache server.
means that the connection is established.
is not established.
show validation group
max-sessions statement.
Connect means that the connection
Copyright © 2017, Juniper Networks, Inc.
command.
Up