Juniper ACX1000 Configuration Manual page 2982

ACX Series Universal Access Router Configuration Guide
2924
Table 204: show protection-group ethernet-ring node-state Output
Fields (continued)
Field Name
APS State
Event
RPL Owner / Ring
Protection Link Owner
WTR Timer / Restore Timer
WTB Timer / Wait to block
timer
Wait to block timer (WTB
Timer)
Guard Timer
Field Description
State of the Ethernet ring APS.
—Indicates that the ring is working in normal condition and
idle
there is no active or pending protection-switching request in the
ring. When the ring is in idle state, it is blocked at the RPL link.
—Indicates that there is a protection switch on the ring
protected
because of a signal failure condition on the ring link.
—Indicates that the manual switch command is active in the
MS
ring.
—Indicates that the forced switch command is active in the
FS
ring.
pending —Indicates that the ring is in pending state.
Events on the ring.
—Indicates that there is no APS request and the ring link is
NR-RB
blocked on the ring owner node.
—Indicates that there is no APS request pending in the ring.
NR
—Indicates that there is signal failure on one or both of
local SF
the ring links of the node.
—Indicates that there is signal failure on one or more
remote SF
ring links of any other node of the ring.
local FS —Indicates that there is a forced switched command
active on one or both of the ring links of the node.
remote FS —Indicates that there is a forced switch command active
on one or more ring links of any other node of the ring.
local MS —Indicates that there is a manual switch command active
on one of the ring links of the node.
remote MS —Indicates that there is a manual switch command
active on one or more ring links of any other node of the ring.
WTR running —Indicates that the wait to restore timer is running
on the RPL owner.
WTB running —Indicates that the wait to block timer is running on
the RPL owner.
Whether this node is the ring owner:
Restoration timer: or
running disabled
Wait to block timer: or
running
Wait to block interval.
Guard timer: or
running disabled
or .
Yes No
.
.
disabled
.
Copyright © 2017, Juniper Networks, Inc.